TRUCK APU
Engine: 3-cylinder Isuzu water-cooled
Diesel engine Truck APU Weight: 440 Lbs
APU Dimensions: 24" W x 29.5" H x 29" D
Warranty: 2 year / 4,000 hours
Environmental: U.S. EPA Tier II Emissions Compliant
Bio-diesel: 20% Max
Fuel Consumption: 0.25 gal/hour
HVAC Dimensions: 18" W x 9" H x 13" D Air Conditioning: 32,000 BTU's
Heating Output: 35,000 BTU's
Evaporator Output: 650 cubic feet / min
Refrigerant: R-134a
| 
17.5 Kilowatt Truck Auxiliary Power Unit - One Piece Steel Frame
- No welds in frame to stress and fail
- Made from quality American 1018 steel plate
- Engineered flanges to provide added strength
- Angular motor mounts
- Dual mounting options – thru or over frame
- Motor positioned inboard to reduce cantilevered stress
- Tough, scratch and rust resistant coating
- Upper Cover
- Aluminum Diamond Plate
- Recessed ABS UV resistant handles
- Four heavy duty rubber latches
- Steel Lower Cover
- One piece construction
- Tough, scratch and rust resistant coating
- Easily removed for service access
- Fully Enclosed Motor and Radiator
- Strong and reliable three cylinder Isuzu engine
- Low RPM operation for increased life
- Four angular motor mounts with 1” thick isolators
- Muffler positioned outside enclosure under frame rail
- Automotive grade radiator
- Powerful 14” electric fan to increase cooling capacity
- Components protected within the enclosure
- Industrial quality seals to improve and control air flow
- Remote condenser for improved airflow & heat transfer
- Serviceability
- Short, direct coolant hoses allow for better access
- Oil filter mounted directly to engine
- Window in frame simplifies draining used oil
- Individual bulkhead plates for easy access and service
- Solid State Electronic Controller
- 3 Automatic modes:
--Standby mode-- for monitoring and charging batteries
--Intermittent mode-- will run APU as need for (heating, cooling, & battery charging)
--Full Time mode-- will run APU anytime the truck is turned off. - Reliable, proven solid state 3 wire motor control
- Totally sealed for any mounting location
- Simple one button start / stop
- Programmable start sequence including glow plugs
- Automatic shutoff for overheating or low oil pressure
- Reliable HVAC System
- Proven evaporator
- Proven digital thermostat and automatic fan control
- High quality compressor
- 3 speed fan
- Wiring Harness, Cables and Hoses
- All wire joints soldered, no crimped splices
- A/C charge ports conveniently located for easy service
- General Construction Techniques
- Service fasteners have thread locking characteristics
- Fasteners class 8.8 -800 MPa min. (150ksi min.)
- All steel components zinc plated or e-coated
- Exposed steel surfaces coated
- Fully designed in 3-D CAD (Solidworks)
- Design verified using COSMOS for FEA (finite element analysis)
|
|
